Nzxt h510 with corsair h100i

Nzxt h510 with corsair h100i DEFAULT

NZXT H500 vs. H510 vs. H510i: A Head-to-Head Comparison

NZXT is one of the biggest names in the world of cases, and they’ve made a reputation for themselves as the best manufacturer in this industry. Their products are consistently outperforming competitors with their premium build quality and impeccable engineering. In addition, the features of their products show that the company puts a fair bit of time and money into refining everything down to the last screw.

That’s all great since it’s exactly what people want when they’re in the market for a decent chassis. But, if we were to put the products from NZXT against each other, which one would stand tall?

In this article, we’re going to give you a direct comparison between three of the best cases the company has released; the H500, the H510, and the H510i.


NZXT H500 vs. H510 vs. H510i – Comparison Chart

Features Comparison Table


If you’re an Overwatch fan, you’re going to love the NZXT H500. This PC Case is one of the most exemplary cases the company has produced so far.

Product Features

This is a case that NZXT made in collaboration with Blizzard Entertainment, the maker of Overwatch. The entire case is themed to follow the color scheme of the Overwatch logo, which is embellished on the front with a bright light behind it. The case is matte black with some orange highlights due to the logo.


However, if you’re not an Overwatch fan, there is a simple black and black/red variant available as well.

The H500 shows precisely why the price tag is justified with its all-steel construction, making it one of the most durable cases in the market. The durability is an added plus with the perfectly engineered design of the case. NZXT made sure to place every bump inside the case with precision for maximum airflow throughout the case.

The H500 is also water-cooling compatible with AIO and custom loop configurations. You can install a 280mm radiator in the front of the case. You get two included AER F 120mm with the H500, and the manufacturer also made it relatively easier to install a reservoir because of the dedicated mount.

Get NZXT H500 at Amazon

The case isn’t the only thing that’s durable. NZXT put in a full-tempered glass side panel so you can openly flaunt your entire RGB setup. NZXT also included pre-installed channels and Velcro straps to make cable management easy and convenient to give your build a clean look. Even if this is the first time you’re building a PC, you’ll be able to do an A-plus job just because of how convenient NZXT makes it.

One minor drawback of the case would be the configurations of its fans. One fan is mounted on the top, and one is on the back of the case. This isn’t that big of an issue, but it can seriously mess up your plans if you’re looking to follow the most mainstream fan configuration.

The fans on the front act as an intake while the top pushes out hot air as an exhaust. As a result, there is enough room to add another fan slot. It’s pretty confusing why NZXT decided it wasn’t worth adding another fan on the top.


  • Made in collaboration with Blizzard Entertainment
  • All-Steel build
  • Amazing airflow
  • Tempered glass side panel
  • Easy to manage cables


  • Fan configuration could’ve been better
  • There are some dust and ventilation issues in the case


When it comes to creating minimalist, sleek setups, there’s nothing that beats the NZXT H510. The H510 has a simple design that creates a vibe unlike any other when paired with the proper hardware.

Product Features

This mid-tower gaming case is a fantastic example of NZXT’s fine engineering at an excellent cost. It has a modern, minimalist design with nothing but simple solid colors on three sides of the case. The fourth side is a crystal-clear tempered glass panel to flaunt your build at its best.


The case is available in three variants: the H510 (the base model we’re talking about right now), the H510 Elite, and the H510i. You can also find three colors for the NZXT H510. Two of these are solid, plain colors; black, and white, since they’re meant for minimalist designs. There’s also a third color, a combination of black and red, which is excellent if your build features some AMD colors.

One of the critical features of the H510 is the modern I/O ports. Unfortunately, most cases in circulation today don’t have I/O ports better than a standard USB 3.0. The H510, however, has a Type-C port that is paired with a USB 3.1 port.

Get NZXT H510 at Amazon

Similar to its predecessor, the H510 makes cable management relatively easy. When you buy the case, you’re getting the company’s own patented cable routing kit. You can use this kit to pass the cable through the premade channels, making the wiring a piece of cake.

As far as the airflow is concerned, it’s decent. However, the minor flaw discussed in the H500 about the fans being installed weirdly isn’t fixed in this case either. There’s still only one exhaust fan at the top. Regardless, you can swap the fan out from an AER F120mm to a 140mm one, which helps out with exhaust a bit.


  • Minimalist design
  • Water cooling ready
  • It comes with a USB-C port
  • Durable tempered glass side panel
  • NZXT’s patented cable routing kit included
  • Supports Mini-ITX, Micro ATX, and ATX boards


  • Incorrect placement of fans
  • Screws are mounted too tight at times and might require a power drill

NZXT H510i

The H510i is a different variant of the same case above, but it takes a turn away from minimalist to go for a more ‘RGB’ approach. Here’s why this case deserves a separate mention.

Product Features

First, let’s quickly go over the H510 vs. H510i debate and see what sets them apart. This case is a part of NZXT’s i-Series which are the company’s RGB selection. The entire case is lined with amazingly bright RGB lights connected directly to the case.

NZXT H510i

All the lights are conveniently attached to a built-in LED control panel for easy customization. This control panel is named the Smart Device and is specific to the i-Series cases in the H range of devices. The device is also equipped with a high-speed microprocessor to control the RGB lighting seamlessly.

Moreover, another great feature that sets this case apart is its support for a vertical mount. Many people aren’t fond of the vertical mounting style of GPUs, but if you’re used to one, this case certainly won’t disappoint. However, you will need to buy a PCIe riser cable separately, which is sort of a bummer. Regardless, it is pretty cheap to buy, so that shouldn’t be much of an issue.

Get NZXT H510i at Amazon

Let’s talk about the things that the H510i has in common with the H510. The same patented cable routing kit comes with the pre-installed channels that we love for cable management. It supports the same motherboard sizes; Mini-ITX, Micro ATX, and ATX. Also, it has a Type-C port and the USB 3.1 port, which is always an excellent addition. Moreover, the side panel on the i-Series case is tempered glass, the same as the H510.


  • Additional lights for the whole RGB experience
  • The control panel for the lights comes with a fast microprocessor
  • Redesigned SSD mount
  • Vertical mounting options available
  • Support for Mini-ITX, Micro ATX, and ATX motherboards
  • Type-C I/O port
  • Zero sharp edges make customization a breeze


  • PCIe riser has to be bought separately
  • You’ll need a power drill to open the screws

NZXT H500 vs. H510 – Comparison

When we talk about the NZXT H500 vs. H510, there are more similarities than differences. NZXT took everything good in the H500 and made it better.

There are two significant differences, though. The first is the colorful and flashy design of the H500 compared to the minimalist design of the H510. Second, the 500 has an Overwatch version of the case, which follows the logo’s orange color scheme.

Secondly, the H500 is a bit less modern than the H510 when it comes to I/O ports. The former only has USB 3.1, while the H510 also comes with an added USB Type-C port. You’ll love the H510 if you’re constantly swapping data from one hard drive to another and need high-speed transfer to move things along quicker.

However, it primarily boils down to personal preference. The colorful/minimalist setup and the lack and presence of USB Type-C are both factors that are specific to people. Some need it; some don’t.

NZXT H510 vs. H510i – Comparison

The 510 and the 510i are two variants of the same case, but the i-Series case is a considerable upgrade. The i-version features two RGB strips attached to the sides of the case. This is something that the 510 doesn’t have. Along with the strips, you’re getting a Smart Device v2 that can control the two LED strips using NZXT’s software.

This defeats the purpose of having a central RGB header like most pre-built PCs in the market do. Instead, one software will be controlling the rest of your setup, while NZXT’s will be used to change the lights on the LED. It’s an extra hassle, but the RGB look does sort of make it worth the effort.

Another minor difference between the two cases is that the H510i can mount the GPU in a vertical setting. Unfortunately, the PCIe riser isn’t included, but buying that separately shouldn’t be much of a problem.

NZXT H500 vs. H510i – Comparison

Once again, the H500 is a bit of a last-gen case, and the H510i is miles ahead of it. H510i comes with USB-Type C support, a form of modern I/O that the H500 lacks.

Another thing that the newer case has is the addition of RGB. The H500 is kind of forced to work off the RGB hardware you’ve installed in the system itself. The 510i has some of its colors as well, which blends in well with the rest of the hardware.

The most significant difference between the two would be the price point. The H510i costs twice as much as the H500, which is a considerable price hike for the extra features. They might be worth the purchase, but if you’re on a tight budget, the H500 will serve you just fine.

Are They Similar in Any Way?

All three of the cases use NZXT’s traditional tempered glass panel. The glass gives the picture-perfect clarity you need to take a peek into the beautiful components loaded inside the case.

NZXT is renowned for the great cable management they provide with their case. It doesn’t matter if this is your first build or tenth. You’ll easily be able to tuck all the wires neatly out of sight. All of the NZXT cases we’ve listed here come with the company’s proprietary patented cable routing kit, making it easier for you to manage the cables.

One thing that we’ve talked about throughout the article is the improper fan configuration. It’s not necessarily wrong, but it is easily fixable and could be made ten times better.

All three cases have space for three intake fans at the front and one fan on the top, and one on the back of the case. This creates decent airflow, but if it was possible to mount another fan next to the one on the top, the dual setup could act as a great way to filter out the hot air.

All three of the cases we’ve mentioned here support ATX motherboard sizes. The H500 only works with ATX, while the other two also support Mini-ITX and Micro ATX.

This is sort of a mainstream requirement in the world of high-end gaming PCs these days. Water-cooling isn’t just an unnecessary expense that people make to get the flashy liquid flowing through their setup. Instead, it’s almost mandatory at this point. To ensure that their cases can stay updated with the latest builds, NZXT adds water-cooling capabilities to all their cases mentioned on this list.

What Sets Them Apart?

The three cases are a world apart when it comes to pricing. The NZXT H500 is relatively affordable and can be a pretty attractive part of any budget build. The NZXT H510 is a bit pricier but still stays far away from triple digits. The H510i, on the other hand, is almost twice the price of the H500 and is the most expensive on the list. The range of features does justify the price range, but it’s not exactly feasible if you’re working on a tight budget.

The H500 and H510 don’t have any RGB capabilities. They’re the preferred cases if you aim to achieve a minimalist solid color look with your cases. However, if you need to add a bit of RGB to the mix, you’re going to need the H510i. It has two RGB strips attached to the inside of the case with a control panel specifically meant to control the RGB lights.

The I/O on the three cases is also different. The H500 is a bit of an older case and only supports ports up to USB 3.1. It’s a decent port, but not as high speed as some like Thunderbolt 3 or even Type-C. So, if you’re looking for faster data transfers, you can go for the H510 and H510i since they come with Type-C ports.

Conclusion: Which of the Three is Best?

There are some significant differences between the three cases, but the major ones are only due to personal preference. While some people like RGB, others don’t. Some people want faster I/O ports, and some don’t. However, if you wanted to rank the three cases, the NZXT H510i sits comfortably at the top as the best case on this market. If you can afford the price of the case, you’ll love what it’ll do for your entire setup.

Similar Post:


How to install the Hydro Series H100i CPU Cooler


The Hydro Series™ H100i is a high performance all in one liquid CPU cooler from Corsair. The H100i is similar to other Hydro Series CPU coolers from with a few exceptions, the main one being that the H100i uses a longer 240mm radiator. Luckily most Corsair PC cases will support the H100i and this blog will serve to illustrate the installation process. In this artice I will be installing the cooler into aVengeance Series C70 case.

First, it’s a good idea to lay out your components and make sure you have everything you will need for your particular CPU socket. The H100i supports the following CPU sockets right out of the box:

  • Intel: LGA, 115x, 1366, 2011
  • AMD: AM2, AM3, FM1, FM2


In this installation we will be attaching the H100i to an Asus P9X79 motherboard which uses the LGA 2011 socket. The H100i ships with two different mounting brackets one for Intel sockets, and one for AMD. Both of the brackets attach to the cooling unit magnetically, so just slide the correct bracket over the cooling unit and it should “snap” into place.

The backplate for the H100i is adjustable and can be configured for any of the supported socket types. Just slide the pins on the bracket so that they align with the holes on the motherboard and then use the double-sided mounting bolts to secure it into place. With Corsair’s PC cases, there is a CPU backplate cutout so you can apply the bracket without having to remove the motherboard from the case. If your case does not have a backplate cutout to access the rear of the motherboard, then you will want to mount the backplate before installing the motherboard into your case.

If you are using a motherboard with socket LGA 2011, or any AMD based motherboard, then no backplate is required. With these sockets you can use the backplate that is already attached to the board.

The mounting bolts serve two purposes, one is to secure the backplate to the motherboard, and the other is to give you a mounting point for the CPU cooling unit and its bracket. Since our motherboard uses the LGA 2011 socket, we do not need to use the included H100i backplate.

There are two sets of double sided mounting bolts, one set has equal length threads on each side of the bolt and are used when the supplied Corsair backplate is being used. For LGA 2011, you will want to use the other set of double sided mounting bolts, the set which has one short threaded side and one longer. The short sided threads screw directly into the LGA 2011 Intel bracket that is already attached to the board. You can see in the picture below that all four double sided mounting bolts have been screwed in directly to the standard LGA 2011 socket.


Now that the backplate and double sided mounting bolts are installed, we will mount the radiator. It will be easier to mount the radiator first, and then the CPU cooling unit, rather than the other way around. In most cases you will need to install the H100i in the top of the case, but if you have a large case with multiple installation points that support 240mm radiators, then feel free to experiment by mounting the H100i in a different area.

The correct order for securing the radiator is Screw > Washer > Case > Radiator.


The fan installation can be done in multiple ways, but by default we would recommend having the fans mounted on the bottom of the unit exhausting air up through the radiator towards the outside of the case. If your system is already set up to have sufficient exhaust, then you can experiment with mounting the fans on top of the radiator where they can push cooler air from outside of the case down through the radiator. If you mount the radiator with the fans on the bottom, then it might be easiest to mount the fans to the radiator before installing the radiator into the case, which is what I did for this installation.


With the fans mounted below the radiator you will want to use the 8x 10mm screws (the shorter set of screws) to secure the radiator to the case. If you are going to set up a push pull configuration (fans mounted on both sides of the radiator), or you are mounting the fans on top of the radiator then you will want to use the longer mounting screws in the following order: Screw > Washer > Case > Fan > Radiator.

Once the radiator, fans and backplate are mounted, it is time to mount the CPU cooling unit. Simply line up the pins with the holes on the CPU bracket and tighten it down with the supplied thumb screws. The H100i comes with thermal material already applied to the CPU cooling unit, so when you are ready to mount the CPU cooling unit, remove the plastic shielding that covers the thermal material and use the 4x thumbscrews to secure it to the mounting bolts that we screwed directly to the Intel 2011 socket earlier.


Now that the unit is mounted, we will want to plug in power cables for both of the fans and the pump. The H100i has an integrated 4-fan hub which is where you will want to plug in your H100i fans. You will find two ports on top of the cooling unit, where you can plug in the included fan power adapter cables. Each adapter will support two fans, and by plugging the fans directly into the fan power adapter cable and into the cooling unit, you will be able to monitor and control the H100i fans through the Corsair Link V2 software.



  1. Pioneer rv reviews
  2. Assassins creed training
  3. Done tamil meaning

H510 Elite

Tech Specs

Key Specs

  • Mini-ITX, MicroATX, ATX

  • Compact Mid-Tower

  • SGCC Steel, Tempered Glass


  • 460mm / 18.11 inches

  • 210mm / 8.27 inches

  • 428mm / 16.85 inches

  • 7.5 kg / 16.53 lb

Compatibility & Clearance

  • 165mm

  • 338 - 368mm

  • 60mm

  • 50.8mm

  • 19 - 23mm

Front I/O Ports

Smart Device

  • 3 (10W max per channel)

  • 2 (Support up to 40 LEDs)

Expansion Slots

Drive Bays

Fan Support

  • 2 x 120mm / 2 x 140mm

  • 1 x 120mm / 1 x 140mm

  • 1 x 120mm

  • All air intakes

Radiator Support

Fan Specs

  • Aer RGB 2 140mm

  • 500 - 1,500 ± 300RPM

  • 30.39 - 91.19 CFM

  • 0.17 - 1.52 mm-H₂O

  • 22 - 33 dBA

  • 4-pin PWM

Fan Specs

  • Aer P 140mm (Case Version)

  • 1,000 ± 200RPM

  • 68.95 CFM

  • 28 dBA

  • 3-pin

Fan Specs

  • Aer P 120mm (Case Version)

  • 1,200 ± 200RPM

  • 50.42 CFM

  • 28 dBA

  • 3-pin


  • 2 Years

  • CA-H510E-W1

  • 815671015112

  • 5060301695294


Manage performance, temperatures, and devices all from a single application.

cam cta

Help & Support

Get extensive guides and support for all your NZXT products as well as help for warranties, return and anything technical

Help and Support


Corsair H100i V2 240mm AIO CPU Cooler Review

Peter Donnell / 5 years ago


Corsair H110i V2 240mm AIO CPU Cooler Review

Corsair is one of the most loved brands on the market today, with a huge range of award-winning products, such as their power supplies, peripherals, chassis and more. Of course, today it is their range of ever-popular CPU water coolers that we’re interested in today, as we take a look at their newly refreshed H100i V2 240mm AIO cooler.

“The Hydro Series H100i v2 is an extreme performance, all-in-one liquid CPU cooler for cases with 240mm radiator mounts. The 240mm radiator and dual SP120L PWM fans provide the excellent heat dissipation you need for highly overclocked CPUs. Corsair Link is built in, so you can monitor temperatures, adjust cooling performance and customize LED lighting directly from your desktop.” – Corsair

Equipped with a 240mm radiator, two powerful Corsair 120mm fans, and a pump that support almost every major socket from Intel and AMD of recent years, the H100i V2 is sounding like a good cooler on paper, so let’s take a closer look at what is on offer.


The box is very nicely designed, with a clear image of the cooler on the front, as well as detailing all the usual spec.


Around the back, more detailed spec for the fans and pump, as well as some images of the various components.


In the box, you’ll find a universal backplate, AMD retention bracket (an Intel one is pre-installed on the pump), all the usual nuts and bolts, as well as the Corsair Link cable.


The included fans are Corsair 120mm 12V Brushless models, we’ve used many of these over the years and they’ve always proven to be a nice balance of cooling and acoustic performance, and they’re nice and durable too.



H510 corsair nzxt h100i with


Corsair H100i RGB Pro XT AIO unboxing and installation (with Corsair QL120 RGB fans too)


Similar news:


704 705 706 707 708